CORRECT CRAFT 200-OB El manual del propietario descargar pdf (Pagina 187)

8-5

Care and Maintenance

Cartridge Replacement

1. Turn off power to the bilge pump.

2. Unscrew the filter bowl (A) by

turning counterclockwise and pour

any excess bilge water remaining in

the bowl back into the bilge.

3. Remove the used cartridge (B) and

dispose of in a suitable container.

4. Inspect the O-ring (C) located on

top of the bowl and replace if worn.

5. Be sure that the seals located on the

top and bottom of new cartridge are

in place and correctly aligned.

6. Place the new cartridge into the

bowl and reattach the bowl to the

filter housing (D) by turning

clockwise.

7. Turn on power to the bilge pump.

8. Turn on the bilge pump and inspect all connections for leaks.

9. Bleed any air trapped in the housing by using the bleed button

(F) or, if so equipped, the bleed screw (E). Both are located on

top of the filter housing.

CORC0241

D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd 7/28/09 9:13 AM Page 8-5

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 227 228

Sin comentarios

CORRECT CRAFT 200-OB El manual del propietario Pagina 187